Our Products

Reverse Pulse jet Cartridge Type Dust Collector

Reverse Pulse jet Pleated Type Bag Dust Collector

CARTRIDGE TYPE PULSE JET FILTER

Suitable for many different applications that generate light to heavy volumes of any dust. The vertical mount range of reverse jet tubular bag dust collectors was developed for continuous operation in industrial process filtration and dust collection applications; incorporating cartridge technology for maximum cleaning efficiency and extended life.

Air Volume Range: 1.700 to 60.000 m3/hr

Silent features :
  • Standard filter range from 10 to 972 m2
  • Typical airflow volumes up to 65.000m3/h , or more
  • Robust weatherproof welded steel construction
  • Customize design as per client's requirement
  • meet with pollution norms
  • Integral pre-separation chamber, down flow inlet air pattern
  • Wide range of discharge options
Typical dust control and process applications :
  • Bulk materials handling-conveying, screening, sieving, mixing, bin/silo venting
  • Shot, sand and bead blasting
  • Building materials manufacture and distribution
  • Dust extraction for all dry free flowing powders and granular material
  • Welding and cutting-laser, plasma, arc
  • Chemical, plastics and pharmaceutical powders

Cartridge Type Dust Collector

The compact cartridge type dust collector with dust container bucket is capable of filtering dust-laden air through suitable filter media capable to have dust emission level of 50mg/Nm3

The dirty or contaminated air enters the dust collector through the module inlet and passes through a number of filter cartridges, which retain the dust particles on the exterior surface while allowing clean air to pass through the module outlet.

As the collector operates, the collected dust begins to form dust cake, which eventually diminishes the porosity of the filter cartridges. As the pressure drop increases the ventilation volume of the collector decreases.

To maintain a moderate pressure drop, the cleaning cycle is employed to provide continuous cleaning of the filter cartridges. The cleaning system consist of a solid-state programmable timer, which actuates electric solenoids governing the air valves. These air valves deliver momentary burst or pulse of high compressed air through the manifold pipe into the filter tube. This push of air creates reverse flow of air, which expands the filter cartridges to remove the collector dust.

.The cleaning procedure occurs on a row-by-row basis therefore only a fraction of total filter air is interrupted for cleaning allowing continuous ventilation.

The dust cake when pulsed from the filter cartridges falls directly into the bucket at the bottom where it is removed.

An exhaust fan suitable for air volume 1000 cubic feet per minute and is mounted on the top of dust collector, which generates the negative draft through out the process.

SALIENT FEATURES:
  • The complete installation is designed to occupy a minimum amount of floor
  • space and overhead room.
  • It can be assembled on site without any requirement of the expertise manpower.
  • The units are of fully welded construction.
  • It has no moving part, which guarantees a long life.